Rigol RSA3015E

The RSA3000E series is a lightweight and compact spectrum analyzer with premium performance capabilities. It’s a real-time spectrum analyzer that allows you to capture and monitor events that are longer than 7.45 microseconds, which makes it easier to monitor and characterize complex RF systems like Wi-Fi, Bluetooth and other modern RF technologies.
Rigol’s new RSA3000E series of spectrum analyzers redefines the product category of general-purpose spectrum analyzers by adding real-time spectrum trigger and analysis capabilities, making it ideal for applications such as RF and wireless testing and production. The RSA3000E family features a 10.1″ touchscreen display, compact design and easy-to-use interface, making it ideal for benchtop or field applications such as IoT (Internet of Things), RFID (radio frequency identification), analog modulated signals and digital modulated signals. Embedded System Designers can use Rigol’s new spectrum analyzer to cross trigger and analyze bus signals like IC2 (I2C) with RF Signals (radio frequency signals). The Real-Time Bandwidth of 10 MHz lets you visualize, isolate, and capture signals to analyze their behavior over amplitude (strength), frequency (cycles per second), and time (elapsed seconds).
The RSA3000E’s RBW is settable down to 10 Hz, its DANL (displayed average noise level) is down to -161 dBm (typical), and it has a 1ms Full Span Sweep in its general-purpose spectrum analyzer mode. The EMI filter and detector standard include 9KHz, 120kHz and Quasi-Peak measurements as examples. Additional options include a preamplifier, high stability clock, advanced measurement kit and EMI precompliance test software.

• 9 kHz to 3 or 4.5 GHz Frequency Range
• 10.1” Capacitive touchscreen display
• Displayed Average Noise Level as low as -161 dBm with opt. PreAmplifier
• Real-Time Analysis Bandwidth of 10 MHz standard (40 MHz option)
• Frequency-Mask-Trigger, IF-Power-Level-Trigger and external Trigger
• 7 Real-Time visualization modes
• 100 % POI as low as 7. 45 µs
• 10 Hz Minimum Resolution Bandwidth (RBW) (1 Hz option)
• 1 ms full span sweep speed
• EMI RBW and Detector standard (200 Hz, 9 kHz, 120 kHz, 1 MHz)
• Tracking Generator and VSWR measurements available