Crimping Tools

Hydraulic Crimping Tool, 50 kN, with an Openable Closed Head, for Electrical Connectors up to 240 mm².

HYDRAULIC CRIMPING TOOL

Hydraulic Crimping Tool, 130 kN, with Open C-Head, for Electrical Connectors up to 400 mm².

BATTERY-POWERED HYDRAULIC CRIMPING TOOL

Battery-powered hydraulic crimping tool with a 68 kN crimping force, bi-linear design, and an openable closed head, suitable for crimping electrical connectors on conductors up to 300 mm².

CORDLESS HYDRAULIC TOOL,CAS CONFORME, WITH 130KN FORCE FOR CRIMPING CONNECTORS USING "C" STYLE DIE SETS FOR FROM 10 TO 400 SQMM.SIZE CONDUCTORS

TNE Series mechanical crimping tool for non-insulated terminals and connectors, compliant with DIN 46235 and DIN 46267 Part 1 standards, suitable for conductor cross-sections from 10 to 120 mm².

Crimping tool kit including the B500ND battery-powered hydraulic crimping tool and a selection of crimping dies.

Mechanical crimping tool for non-insulated cable lugs and connectors, compliant with DIN 46235, suitable for conductor cross-sections from 6 to 50 mm².

ZKE Series mechanical crimping tool with side-entry design, for wire-end ferrules with conductor cross-sections from 0.1 to 16 mm². כלי לחיצה מכני מסדרת ZKE של חברת CEMBRE האיטלקית עם הזנה צידית, אידיאלי לסופיות בטווח חתכים 0.1–16 מ״מ². במשקל של 375 גרם בלבד, ועם ידיות ארגונומיות מפלסטיק דו־רכיבי, הכלי מספק אחיזה נוחה, בטוחה ואנטי־החלקה, ומפחית עייפות במהלך העבודה. הדגם ZKE616N, שתוכנן כולו על־ידי CEMBRE, מבטיח חיבור אמין והוא בעל הסמכת cUL® ו־UL® כאשר נעשה בו שימוש עם מסופים מדגמי CEMBRE PKE, PKC, PKD ו־PKT. טווח חתך לחיצה: 0.1–16 מ״מ² גיאומטריית קימפול: מרובע (Square) משקל נטו בעבודה: 380 גרם מידות: 184 × 80 × 30.4 מ״מ מידות מרביות: 184 × 157 × 30.4 מ״מ

ZKE Series mechanical crimping tool with side-entry design, for wire-end ferrules with conductor cross-sections from 0.1 to 10 mm².

Battery-Powered Hydraulic Crimping Tool, 68 kN, Pistol-Grip Design with an Openable Closed Head, for Electrical Connectors up to 300 mm².

כלי מכני ללחיצה, 60kN, עם ראש סגור הניתן לפתיחה, עבור מחברי חשמל עד 300 מ״מ².

KIT COMPOSED BY HYDRAULIC CRIMPING TOOL B500 + SELECTION OF DIES

Battery-operated hydraulic crimping tool, 63 kN, pistol-grip design, with an openable closed head, for electrical connectors up to 300 mm².

Battery-powered hydraulic crimping tool, 63 kN, pistol-grip design, with an openable closed head, for electrical connectors up to 300 mm².

Crimping tool kit including the B600CND hydraulic crimping tool and a selection of MK crimping dies compliant with DIN standards.

CRIMPSTAR series mechanical crimping tool for pre-insulated electrical connectors, suitable for conductor cross-sections from 0.25 to 6 mm².

CRIMPSTAR MECHANICAL TOOL FOR CRIMPING LUGS DR (DIN 46235), THROUGH CONNECTORS DSV (DIN46267)

Battery-Powered Hydraulic Crimping Tool Kit, 63 kN, Pistol-Grip Design with an Openable Closed Head, for Electrical Connectors up to 300 mm², Including 10 MK Crimping Dies Compliant with DIN Standards.